CAT40 10mm-150mm - Shrink Fit Holder

Item #: TE1229218
Manufacturer: Techniks
Mfg #: 29218

Technical Specifications:
*Bore Diameter: 10mm *Brand Name: Techniks *European-DIN Tool Shank Range: 10mm *Gage Length: 150mm *Outside Diameter: 2.5 *Shank: 10mm *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 0.39

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .1931

$321.21

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

6mm CAT 40 Shrink Fit Toolholder - 70mm Gauge Length

Item #: GM306M70
Manufacturer: Briney
Mfg #: V40SF-6M-7

Technical Specifications:
*Bearing Surface: 19.05mm *Bore Diameter: 6mm *Brand Name: Briney *Gage Length: 2.756 *Outside Diameter: 25.4mm *Shank: CAT40 *Standard: ANSI *Type: CV Shrink Fit

Description:
*Materials certified and traceable to NIST standards *360 degree Tool grip along the entire length of bore resulting in an evenly distributed clamping force and superior concentricity *Balanced to 20,000 RPM at G2.5 *Maximum .0002? T.I.R. or better *Certified H-13 material

Shipping Info:
*Actual Weight - 2.5000

$270.22

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK 63A 3/8"-80mm - Shrink Fit Holder - Slim Line

Item #: TE1273568
Manufacturer: Techniks
Mfg #: 73568

Technical Specifications:
*Bore Diameter: 3/8 *Brand Name: Techniks *European-DIN Tool Shank Range: 9.5mm *Gage Length: 80mm *Outside Diameter: 2.48 *Shank: 3/8 *Standard: ISO 1940 *Type: Shrink Fit HSK Holder *USA-ANSI Tool Shank Range: 3/8

Description:
*Smaller nose diameter than traditional ShrinkFIT designs *Maximum T.I.R. onlly 0.0001" *Balanced to 25,000 RPM at G2.5 tolerance *Great for finish passes where small nose diameter tooling is required *Coolant through spindle with coolant set screw comes standard *Each holder is certified for accuracy and balance and comes with it's own lab report

Shipping Info:
*Actual Weight - .1125

$273.28

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/4" CAT 50 Shrink Fit Toolholder - 4.0" Gauge Length

Item #: GM307540050
Manufacturer: Briney
Mfg #: V50SF-075-

Technical Specifications:
*Bearing Surface: 1.250 *Bore Diameter: 3/4 *Brand Name: Briney *Gage Length: 4.000 *Outside Diameter: 1.500 *Shank: CAT50 *Standard: ANSI *Type: CV Shrink Fit

Description:
*Materials certified and traceable to NIST standards *360 degree Tool grip along the entire length of bore resulting in an evenly distributed clamping force and superior concentricity *Balanced to 20,000 RPM at G2.5 *Maximum .0002? T.I.R. or better *Certified H-13 material

Shipping Info:
*Actual Weight - 8.0000

$441.03

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

5mm Strght SH 16mm Dia. Shrink Extension 110mm Long

Item #: GM269196069
Manufacturer: Bilz
Mfg #: 9196069

Technical Specifications:
*Bearing Surface: 25mm *Bore Diameter: 5mm *Brand Name: Bilz *Gage Length: 58mm *Outside Diameter: 16mm *Shank: Straight *Type: Shrink Fit Extension

Description:

Shipping Info:
*Actual Weight - 2.4000

$188.64

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 5mm-100mm - Shrink Fit Holder

Item #: TE1229206
Manufacturer: Techniks
Mfg #: 29206

Technical Specifications:
*Bore Diameter: 5mm *Brand Name: Techniks *European-DIN Tool Shank Range: 5mm *Gage Length: 100mm *Outside Diameter: 2.5 *Shank: 5mm *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 0.2

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .1381

$287.56

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

BT30 6MMX80MM GL SHRINK FIT CHUCK

Item #: HA713064006
Manufacturer: Haimer USA LLC
Mfg #: 30.640.06

Technical Specifications:
*Brand Name: Haimer USA LLC

Description:

Shipping Info:
*Actual Weight - 1.2540

$292.65

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

BT40-SLK12-45

Item #: TP348910002
Manufacturer: OSG USA, Inc.
Mfg #: 8910002

Technical Specifications:
*Brand Name: OSG USA, Inc. *List No.: SHRINK

Description:

Shipping Info:
*Actual Weight - 2.4100 *Dimensions - Height: 3.05 Length: 7.00 Width: 3.25

$508.90

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK63 3/4 x 6.30 - Shrink Fit Tool Holder

Item #: GM94H63756309
Manufacturer: Parlec
Mfg #: H63A-75SF6

Technical Specifications:
*Bore Diameter: 3/4 *Brand Name: Parlec *Gage Length: 6.300 *Model Number: H63A-75SF630-9 *Shank: HSK63A *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 6.0000

$423.18

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK100A 6MM SHRINK FIT HOLDER

Item #: GM76500741
Manufacturer: Lyndex
Mfg #: H100A-SF6-

Technical Specifications:
*Brand Name: Lyndex

Description:

Shipping Info:
*Actual Weight - .9900

$661.79

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

BT40 3/8 x 6.30 - Shrink Fit Tool Holder

Item #: GM94BT40386309
Manufacturer: Parlec
Mfg #: BT40-38SF6

Technical Specifications:
*Bore Diameter: 3/8 *Brand Name: Parlec *Gage Length: 6.300 *Model Number: BT40-38SF630-9 *Shank: BT40 *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 5.0000

$316.11

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 3/4 x 3.15 Shrink Fit Chuck

Item #: HA715084034Z4
Manufacturer: Haimer USA LLC
Mfg #: 50.840.3/4

Technical Specifications:
*Bore Diameter: 3/4 *Brand Name: Haimer USA LLC *Gage Length: 3.15 *Model Number: 50.840.3/4Z.4 *Outside Diameter: 1.65 *Shank: CAT50 *Type: Shrink Fit Chuck

Description:
*Shrink fit chuck suitable to all kind of shrink fit units *Fine balanced to G2.5 at 25,000 RPM *Certified AT3 Taper *High runout accuracy < 3µ¼m *Heat resistant hot-working steel *Hardened 54-2 HRC *For HSS and solid carbide tools *Shank tolerance h6 *With threaded holes in order to balance with balancing screws *Cool Jet coolant bores that can be sealed included *Made in Germany

Shipping Info:
*Actual Weight - 8.0000

$515.97

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 3/8"-8" - Shrink Fit Holder

Item #: TE12290588
Manufacturer: Techniks
Mfg #: 29058-8

Technical Specifications:
*Bore Diameter: 3/8 *Brand Name: Techniks *European-DIN Tool Shank Range: 9.5mm *Gage Length: 8 *Outside Diameter: 3.88 *Shank: 3/8 *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 3/8

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - 1.0000

$473.14

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

6MM TRIBOS-S EXTENSION

Item #: HF80205645
Manufacturer: Schunk
Mfg #: 205645

Technical Specifications:
*Brand Name: Schunk

Description:

Shipping Info:
*Actual Weight - .9900

$463.96

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 14mm-100mm - Shrink Fit Holder

Item #: TE1229226
Manufacturer: Techniks
Mfg #: 29226

Technical Specifications:
*Bore Diameter: 14mm *Brand Name: Techniks *European-DIN Tool Shank Range: 14mm *Gage Length: 100mm *Outside Diameter: 2.5 *Shank: 14mm *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 0.55

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .2481

$249.83

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 1IN SHRINK FIT HOLDER

Item #: GM760SF1000394
Manufacturer: Lyndex
Mfg #: CAT50-SF10

Technical Specifications:
*Brand Name: Lyndex

Description:

Shipping Info:
*Actual Weight - .9900

$349.76

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 3/16"-5" - Shrink Fit Holder with Coolblast

Item #: TE1229008B
Manufacturer: Techniks
Mfg #: 29008B

Technical Specifications:
*Bore Diameter: 3/16 *Brand Name: Techniks *European-DIN Tool Shank Range: 4.8mm *Gage Length: 5 *Outside Diameter: 2.5 *Shank: 3/16 *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 3/16

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *CoolBLAST allows for in-the-bore coolant delivery onto the work piece *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .1812

$293.67

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

5/8-1/4X6.30"GL SHRINK EXTENSION

Item #: HA717758Z014Z
Manufacturer: Haimer USA LLC
Mfg #: 77.5/8Z0.1

Technical Specifications:
*Brand Name: Haimer USA LLC

Description:

Shipping Info:
*Actual Weight - .5500

$250.85

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 1/2 x 3.54 - Shrink Fit Tool Holder

Item #: GM94C50503159
Manufacturer: Parlec
Mfg #: C50-50SF31

Technical Specifications:
*Bore Diameter: 1/2 *Brand Name: Parlec *Gage Length: 3.150 *Model Number: C50-50SF315-9 *Shank: CAT50 *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 8.0000

$327.32

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 14mm-100mm - Shrink Fit Holder

Item #: TE1229268
Manufacturer: Techniks
Mfg #: 29268

Technical Specifications:
*Bore Diameter: 14mm *Brand Name: Techniks *European-DIN Tool Shank Range: 14mm *Gage Length: 100mm *Outside Diameter: 3.88 *Shank: 14mm *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 0.55

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .4550

$336.50

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It