Workholding - Tooling & Acc. - End & Shell Mill Holders - Shrinkfit Holders - (4832 Products)
HSK 63A 3/8" x 160 - Shrink Fit Holder
Item #: TE1293130
Manufacturer: Techniks
Mfg #: 93130
Technical Specifications:
*Bore Diameter: 3/8
*Brand Name: Techniks
*European-DIN Tool Shank Range: 9.5mm
*Gage Length: 160mm
*Outside Diameter: 2.48
*Shank: 3/8
*Standard: ISO 1940
*Type: Shrink Fit HSK Holder
*USA-ANSI Tool Shank Range: 3/8
Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish
*ShrinkFIT produces less wear and tear on the spindle bearings
*Ideal for high-speed or high-torque machining
*Maximum T.I.R. is 0.0001"
*Each holder is lab certified for accuracy and comes with an individual lab report
*Tool holders are balanced at 25,000 to G2.5 tolerance
*Each holder comes with a coolant-thru set screw installed
Shipping Info:
*Actual Weight - .1937
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT50 5/8 x 3.54 - Shrink Fit Tool Holder
Item #: GM94C50623159
Manufacturer: Parlec
Mfg #: C50-62SF31
Technical Specifications:
*Bore Diameter: 5/8
*Brand Name: Parlec
*Gage Length: 3.150
*Model Number: C50-62SF315-9
*Shank: CAT50
*Standard: DIN
Description:
*Shrink Fit Tool Holder
*Improved concentricity
*Improved balance design with no moving pieces
*Low Centrifugal Forces due to low holder mass
*For maximum gripping power with exceptional concentricity
*Concentricity of .0001" with tool shrunk in holder
*Chip load distributed evenly along cutting edge of tool which results in longer tool life
*Constructed of double tempered Tool Steel for exceptional durability and cycle life
*With proper use, toolholder life should exceed that of standard end mill holders
*Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force
*Short projections are possible because no mechanical clamping devices are used
*This results in greater rigidity and resistance to bending
*Simple and fast to use
*The total time elapsed to remove one cutting tool and insert another is less than 10 seconds
*Through-spindle coolant capability
*Coolant through holders require no special backup screws or seals
*The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves
*The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use
Shipping Info:
*Actual Weight - 8.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT40 3mm Bore Dia. x 95mm Gage Length Shrink Fit Toolholder
Item #: GM279087273
Manufacturer: Bilz
Mfg #: 9087273
Technical Specifications:
*Bearing Surface: 20mm
*Bore Diameter: 3mm
*Brand Name: Bilz
*Gage Length: 95mm
*Outside Diameter: 20mm
*Shank: CAT40
*Type: Shrink Fit Toolholder
Description:
Shipping Info:
*Actual Weight - 2.5000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/2" CAT 40 Shrink Fit Toolholder - 6.3" Gauge Length
Item #: GM30050630D
Manufacturer: Briney
Mfg #: V40SF-050-
Technical Specifications:
*Bearing Surface: 1.457
*Bore Diameter: 1/2
*Brand Name: Briney
*Gage Length: 6.299
*Outside Diameter: 1.260
*Shank: CAT40
*Standard: DIN
*Type: CV Shrink Fit
Description:
*Materials certified and traceable to NIST standards
*360 degree Tool grip along the entire length of bore resulting in an evenly distributed clamping force and superior concentricity
*Balanced to 20,000 RPM at G2.5
*Maximum .0002? T.I.R. or better
*Certified H-13 material
Shipping Info:
*Actual Weight - 5.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
BT30 1/4 SHRINK FIT HOLDER
Item #: GM76BT30SF02503
Manufacturer: Lyndex
Mfg #: BT30-SF025
Technical Specifications:
*Brand Name: Lyndex
Description:
Shipping Info:
*Actual Weight - .9900
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT40 16mm-100mm - Shrink Fit Holder
Item #: TE1229232
Manufacturer: Techniks
Mfg #: 29232
Technical Specifications:
*Bore Diameter: 16mm
*Brand Name: Techniks
*European-DIN Tool Shank Range: 16mm
*Gage Length: 100mm
*Outside Diameter: 2.5
*Shank: 16mm
*Standard: ISO 1940
*Type: Shrink Fit CAT Holder
*USA-ANSI Tool Shank Range: 0.63
Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish
*ShrinkFIT produces less wear and tear on the spindle bearings
*Ideal for high-speed or high-torque machining
*Maximum T.I.R. is 0.0001"
*Each holder is lab certified for accuracy and comes with an individual lab report
*Tool holders are balanced at 25,000 to G2.5 tolerance
*Each holder comes with a coolant-thru set screw installed
Shipping Info:
*Actual Weight - .2756
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT50 3/4 SHRINK FIT HOLDER
Item #: GM76SF0750512
Manufacturer: Lyndex
Mfg #: CAT50-SF07
Technical Specifications:
*Brand Name: Lyndex
Description:
Shipping Info:
*Actual Weight - .9900
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/4" CAT 40 Shrink Fit Toolholder - 4.0" Gauge Length
Item #: GM3075400
Manufacturer: Briney
Mfg #: V40SF-075-
Technical Specifications:
*Bearing Surface: 1.250
*Bore Diameter: 3/4
*Brand Name: Briney
*Gage Length: 4.000
*Outside Diameter: 1.500
*Shank: CAT40
*Standard: ANSI
*Type: CV Shrink Fit
Description:
*Materials certified and traceable to NIST standards
*360 degree Tool grip along the entire length of bore resulting in an evenly distributed clamping force and superior concentricity
*Balanced to 20,000 RPM at G2.5
*Maximum .0002? T.I.R. or better
*Certified H-13 material
Shipping Info:
*Actual Weight - 3.5000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT40 3/4"-5" - Shrink Fit Holder
Item #: TE1229037
Manufacturer: Techniks
Mfg #: 29037
Technical Specifications:
*Bore Diameter: 3/4
*Brand Name: Techniks
*European-DIN Tool Shank Range: 19.1mm
*Gage Length: 5
*Outside Diameter: 2.5
*Shank: 3/4
*Standard: ISO 1940
*Type: Shrink Fit CAT Holder
*USA-ANSI Tool Shank Range: 3/4
Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish
*ShrinkFIT produces less wear and tear on the spindle bearings
*Ideal for high-speed or high-torque machining
*Maximum T.I.R. is 0.0001"
*Each holder is lab certified for accuracy and comes with an individual lab report
*Tool holders are balanced at 25,000 to G2.5 tolerance
*Each holder comes with a coolant-thru set screw installed
Shipping Info:
*Actual Weight - .2756
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT50 8mm x 80mm Shrink Fit Chuck
Item #: HA7150840084
Manufacturer: Haimer USA LLC
Mfg #: 50.840.08.
Technical Specifications:
*Bore Diameter: 8mm
*Brand Name: Haimer USA LLC
*Gage Length: 80mm
*Model Number: 50.840.08.4
*Outside Diameter: 27mm
*Shank: CAT50
*Type: Shrink Fit Chuck
Description:
*Precesion AT3 Tolerance Shank
*Balanced to G2.5 at 22,000 RPM
*Highest Possible Clamping Force
*< 3-micron T.I.R.
*All functional surfaces precision ground
Shipping Info:
*Actual Weight - 7.5800
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT40 1/8 SHRINK FIT HOLDER
Item #: GM7640SF0125315
Manufacturer: Lyndex
Mfg #: CAT40-SF01
Technical Specifications:
*Brand Name: Lyndex
Description:
Shipping Info:
*Actual Weight - .9900
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
12MM TRIBOS-S EXTENSION
Item #: HF80205607
Manufacturer: Schunk
Mfg #: 205607
Technical Specifications:
*Brand Name: Schunk
Description:
Shipping Info:
*Actual Weight - .9900
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/8" CAT 40 Shrink Fit Toolholder - 4.0" Gauge Length
Item #: GM3038400
Manufacturer: Briney
Mfg #: V40SF-038-
Technical Specifications:
*Bearing Surface: .750
*Bore Diameter: 3/8
*Brand Name: Briney
*Gage Length: 4.000
*Outside Diameter: 1.125
*Shank: CAT40
*Standard: ANSI
*Type: CV Shrink Fit
Description:
*Materials certified and traceable to NIST standards
*360 degree Tool grip along the entire length of bore resulting in an evenly distributed clamping force and superior concentricity
*Balanced to 20,000 RPM at G2.5
*Maximum .0002? T.I.R. or better
*Certified H-13 material
Shipping Info:
*Actual Weight - 3.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Power Clamp Preset NG
Item #: HA728013001NG
Manufacturer: Haimer USA LLC
Mfg #: 80.130.01N
Technical Specifications:
*Brand Name: Haimer USA LLC
*Model Number: 80.130.01NG
*Type: Power Clamp Preset Ng
Description:
*Shrinking & cooling in record time
*Universal shrink technology accomodates all shrink holder brands
*Shrink Carbide and HSS tools
*Shrink tools from 1/8 - 2" in diameter
*Minimal heating zone means the taper and tool remain cool
Shipping Info:
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT40 1/4" Bore Dia. x 3.27 Gage Length Shrink Fit Tool Holder
Item #: GM279075136
Manufacturer: Bilz
Mfg #: 9075136
Technical Specifications:
*Bearing Surface: 1.42
*Bore Diameter: 1/4"
*Brand Name: Bilz
*Gage Length: 3.27
*Outside Diameter: 0.71
*Shank: CAT40
*Type: Shrink Fit SlimLine Holder
Description:
Shipping Info:
*Actual Weight - 2.7000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
HSK 100A 1/8"-3.54" - Shrink Fit Holder
Item #: TE1239304
Manufacturer: Techniks
Mfg #: 39304
Technical Specifications:
*Bore Diameter: 1/8
*Brand Name: Techniks
*European-DIN Tool Shank Range: 3.2mm
*Gage Length: 3.54
*Outside Diameter: 3.94
*Shank: 1/8
*Standard: ISO 1940
*Type: Shrink Fit HSK Holder
*USA-ANSI Tool Shank Range: 1/8
Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish
*ShrinkFIT produces less wear and tear on the spindle bearings
*Ideal for high-speed or high-torque machining
*Maximum T.I.R. is 0.0001"
*Each holder is lab certified for accuracy and comes with an individual lab report
*Tool holders are balanced at 25,000 to G2.5 tolerance
*Each holder comes with a coolant-thru set screw installed
Shipping Info:
*Actual Weight - .3125
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
ST10-SLS3-80
Item #: TP348910120
Manufacturer: OSG USA, Inc.
Mfg #: 8910120
Technical Specifications:
*Brand Name: OSG USA, Inc.
*List No.: SHRINK
Description:
Shipping Info:
*Actual Weight - .1050
*Dimensions - Height: 1.15 Length: 3.50 Width: 1.30
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT50 1/2 SHRINK FIT HOLDER
Item #: GM760SF0500512
Manufacturer: Lyndex
Mfg #: CAT50-SF05
Technical Specifications:
*Brand Name: Lyndex
Description:
Shipping Info:
*Actual Weight - .9900
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
ST25.4-SLS 1/2-9
Item #: TP349910159
Manufacturer: OSG USA, Inc.
Mfg #: 9910159
Technical Specifications:
*Brand Name: OSG USA, Inc.
*List No.: SHRINK
Description:
Shipping Info:
*Actual Weight - 1.3800
*Dimensions - Height: 1.20 Length: 9.80 Width: 1.30
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT50 3/8"-6" - Shrink Fit Holder with Coolblast
Item #: TE12290586B
Manufacturer: Techniks
Mfg #: 29058-6B
Technical Specifications:
*Bore Diameter: 3/8
*Brand Name: Techniks
*European-DIN Tool Shank Range: 9.5mm
*Gage Length: 6
*Outside Diameter: 3.88
*Shank: 3/8
*Standard: ISO 1940
*Type: Shrink Fit CAT Holder
*USA-ANSI Tool Shank Range: 3/8
Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish
*ShrinkFIT produces less wear and tear on the spindle bearings
*CoolBLAST allows for in-the-bore coolant delivery onto the work piece
*Ideal for high-speed or high-torque machining
*Maximum T.I.R. is 0.0001"
*Each holder is lab certified for accuracy and comes with an individual lab report
*Tool holders are balanced at 25,000 to G2.5 tolerance
*Each holder comes with a coolant-thru set screw installed
Shipping Info:
*Actual Weight - 1.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It