32" Thick, Round Cross Section

Item #: 47404173
Brand: Value Collection
Exact Tooling IR#: 04

Features and Benefits

Round cross-section shapes can be used in both static and dynamic applications. They are used as a mechanical seal or gasket and are seated in a groove and compressed during assembly between two or more parts.

Viton is a highly corrosion-resistant material used against petroleum fluids, diester lubricants, silicone fluids, phosphate esters, solvents and acids except for fuming nitric acids. It is especially good for hard vacuum services and low gas permeability. Not for use with acetates, ketones, methyl alcohol, brake fluids, hot water or steam.

Product Specifications
Cross Section Shape	Round
Material	Viton
Dash Number	133
System of Measurement	Inch
Durometer (Shore A)	90A
Inside Diameter (Inch)	1-13/16
Inside Diameter (Decimal Inch)	1.7990
Outside Diameter (Inch)	2
Outside Diameter (Decimal Inch)	2.0050
Thickness (Inch)	3/32
Thickness (Decimal Inch)	0.1030
Maximum Temperature (F)	400.000
Minimum Temperature (F)	-15
Number of Pieces	10

Product Specifications

Cross Section Shape Round

Material Viton

Dash Number 133

System of Measurement Inch

Durometer (Shore A) 90A

Inside Diameter (Inch) 1-13/16

Inside Diameter (Decimal Inch) 1.7990

Outside Diameter (Inch) 2

Outside Diameter (Decimal Inch) 2.0050

Thickness (Inch) 3/32

Thickness (Decimal Inch) 0.1030

Maximum Temperature (F) 400.000

Minimum Temperature (F) -15

Number of Pieces 10

$15.27

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Value Collection - 2-9/16" ID x 2-3/4" OD, Aflas O-Ring - 3/32" Thick, 80 Durometer

Item #: 78002367
Brand: Value Collection
Exact Tooling IR#: 04

Features and Benefits

Alfas is a copolymer featuring a combination of high temperature, chemical and electrical resistance properties. It has a better base resistance and steam resistance than Viton and recommended for use against oils and lubricants, hydraulic and brake fluids, transmission fluids, corrosion inhibitors and a variety of other chemicals.

Product Specifications
Material	Aflas
Dash Number	145
Durometer	80
Inside Diameter (Decimal Inch)	2.5630
Inside Diameter (mm)	64.77
Outside Diameter (Decimal Inch)	2.7500
Outside Diameter (mm)	69.85
Thickness (mm)	2.62
Thickness (Inch)	3/32
Thickness (Decimal Inch)	0.1030
Maximum Temperature (F)	450.000
Minimum Temperature (F)	25.000

Product Specifications

Material Aflas

Dash Number 145

Durometer 80

Inside Diameter (Decimal Inch) 2.5630

Inside Diameter (mm) 64.77

Outside Diameter (Decimal Inch) 2.7500

Outside Diameter (mm) 69.85

Thickness (mm) 2.62

Thickness (Inch) 3/32

Thickness (Decimal Inch) 0.1030

Maximum Temperature (F) 450.000

Minimum Temperature (F) 25.000

$10.45

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Caplugs - Button Finishing Plug for 0.05 to 0.1" Thick Panels, - 4.13" ID, 4.37 OD, 0.28" Deep, Low-Density Polyethylene, Black

Item #: 33437070
Brand: Caplugs
Model #: 077167AB
Exact Tooling IR#: 04

Product Specifications
Style	Button
Panel Thickness (Decimal Inch)	0.0500 to 0.1000
Inside Diameter (Decimal Inch)	4.1300
Outside Diameter (Decimal Inch)	4.3700
Depth (Decimal Inch)	0.2800
Color	Black
Head Type	Flush
Material	Low-Density Polyethylene

$820.21

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Caplugs - Round Head Flange Cap - High-Density Polyethylene, Black

Item #: 33433806
Brand: Caplugs
Model #: K06963AA
Exact Tooling IR#: 04

Product Specifications
Type	Flange Cap
Style	Round Head
Material	High-Density Polyethylene
Color	Black
Compatible Pipe Size (Inch)	46
Pressure Class (Lb.)	600

$151.23

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Value Collection - 3-1/2" ID x 3-3/4" OD, Silicone O-Ring - 1/8" Thick, Round Cross Section

Item #: 43763614
Brand: Value Collection
Exact Tooling IR#: 04

Features and Benefits

Round cross-section shapes can be used in both static and dynamic applications. They are used as a mechanical seal or gasket and are seated in a groove and compressed during assembly between two or more parts.

Silicone is a nonadhesive, self-fusing material that is easy to work with. It is primarily used in high-temperature and temporary applications for insulating and moisture sealing. It can be used where long term exposure to dry heat is expected, but it is limited to static applications. It resists brake fluids and high aniline point oil.

Product Specifications
Cross Section Shape	Round
Material	Silicone
Dash Number	238
System of Measurement	Inch
Durometer (Shore A)	70
Inside Diameter (Inch)	3-1/2
Inside Diameter (Decimal Inch)	3.4840
Outside Diameter (Inch)	3-3/4
Outside Diameter (Decimal Inch)	3.7500
Thickness (mm)	3.53
Thickness (Inch)	1/8
Thickness (Decimal Inch)	0.1390
Maximum Temperature (F)	450.000
Minimum Temperature (F)	-80.000
Additional Information	FDA Compliant Material

Product Specifications

Cross Section Shape Round

Material Silicone

Dash Number 238

System of Measurement Inch

Durometer (Shore A) 70

Inside Diameter (Inch) 3-1/2

Inside Diameter (Decimal Inch) 3.4840

Outside Diameter (Inch) 3-3/4

Outside Diameter (Decimal Inch) 3.7500

Thickness (mm) 3.53

Thickness (Inch) 1/8

Thickness (Decimal Inch) 0.1390

Maximum Temperature (F) 450.000

Minimum Temperature (F) -80.000

Additional Information FDA Compliant Material

$8.85

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Caplugs - Button Finishing Plug for 0.03 to 0.08" Thick Panels, - 0.73" ID, 1.01 OD, 1/4" Deep, Low-Density Polyethylene, Black

Item #: 33447160
Brand: Caplugs
Model #: 071201AB
Exact Tooling IR#: 04

Product Specifications
Style	Button
Panel Thickness (Decimal Inch)	0.0300 to 0.0800
Inside Diameter (Decimal Inch)	0.7300
Outside Diameter (Decimal Inch)	1.0100
Depth (Inch)	1/4
Color	Black
Head Type	Flush
Material	Low-Density Polyethylene

$438.23

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Caplugs - 1.088" ID, Round Head Plug - 5/8" Long, Low-Density Polyethylene, Yellow

Item #: 33432923
Brand: Caplugs
Model #: 112601KB
Exact Tooling IR#: 04

Product Specifications
Type	Plug
Style	Round Head
Large End Outside Diameter (Decimal Inch)	1.0880
Length (Inch)	5/8
Material	Low-Density Polyethylene
Color	Yellow
Compatible TPI	18

$418.27

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

KIPP - 5/8-11, 1.61" Hub Diam, Steel Threaded Stud Adjustable Tension Lever with 0° Handle - 1.18" Stud Length, 5.3" OAL, 2.22" High

Item #: 79622296
Brand: KIPP
Model #: K0108.4A62X30
Exact Tooling IR#: 04

Product Specifications
Connection Type	Threaded Stud Tension Lever with 0 Degree Handle
Thread Size	5/8-11
Handle Material	Steel
Height (Inch)	2.22
Hub Diameter (Decimal Inch)	1.6100
Stud Length (Decimal Inch)	1.1800

$54.96

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Caplugs - 5-3/16" ID, Round Head Cap - 5.36" OD, 1-3/8" Long, Vinyl, Red

Item #: 33463829
Brand: Caplugs
Model #: AD15A13A
Exact Tooling IR#: 04

Product Specifications
Type	Cap
Style	Round Head
Inside Diameter (Decimal Inch)	5.1870
Outside Diameter (Decimal Inch)	5.3600
Length (Inch)	1-3/8
Material	Vinyl
Color	Red

$731.16

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Value Collection - 114.2mm ID x 125.6mm OD, Fluoroelastomer O-Ring - 5.7mm Thick, Round Cross Section, 75 Durometer

Item #: 38816377
Brand: Value Collection
Exact Tooling IR#: 04

Features and Benefits

Round cross-section shapes can be used in both static and dynamic applications. They are used as a mechanical seal or gasket and are seated in a groove and compressed during assembly between two or more parts.

Fluoroelastomer is a high performance synthetic rubber resistant to chemicals, oils, fuels, and extreme temperatures. It offers good resistance to abrasion.

Product Specifications
Cross Section Shape	Round
Material	Fluoroelastomer
System of Measurement	Metric
Durometer	75
Inside Diameter (mm)	114.20
Outside Diameter (mm)	125.60
Thickness (mm)	5.70

Product Specifications

Cross Section Shape Round

Material Fluoroelastomer

System of Measurement Metric

Durometer 75

Inside Diameter (mm) 114.20

Outside Diameter (mm) 125.60

Thickness (mm) 5.70

$20.29

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Caplugs - 2.85" ID, Push-On, Round Head Flange Cap - 3.05" OD, 29/64" Long, Vinyl, Red

Item #: 33544784
Brand: Caplugs
Model #: Z250A13A
Exact Tooling IR#: 04

Product Specifications
Type	Flange Cap
Style	Push-On;Round Head
Inside Diameter (Decimal Inch)	2.8500
Outside Diameter (Decimal Inch)	3.0500
Length (Inch)	29/64
Material	Vinyl
Color	Red

$504.55

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Value Collection - 1-1/4" ID x 1-3/8" OD, Buna-N O-Ring - 1/16" Thick, 90 Durometer

Item #: 79285177
Brand: Value Collection
Exact Tooling IR#: 04

Features and Benefits

Buna-N, also known as nitrile rubber (NBR), is made of a synthetic rubber that has anti-microbial properties and is resistant to chemicals, oils, solvents, greases and petroleum-based fluids. It is resistant to abrasions, cuts, punctures, slashes and snags.

Product Specifications
Material	Buna-N
Dash Number	026
Durometer	90 DURO O-RING
Inside Diameter (Decimal Inch)	1.2500
Inside Diameter (mm)	31.47
Outside Diameter (Decimal Inch)	1.3750
Outside Diameter (mm)	34.92
Thickness (mm)	1.78
Thickness (Inch)	1/16
Thickness (Decimal Inch)	0.0700
Maximum Temperature (F)	250.000
Minimum Temperature (F)	-40.000

Product Specifications

Material Buna-N

Dash Number 026

Durometer 90 DURO O-RING

Inside Diameter (Decimal Inch) 1.2500

Inside Diameter (mm) 31.47

Outside Diameter (Decimal Inch) 1.3750

Outside Diameter (mm) 34.92

Thickness (mm) 1.78

Thickness (Inch) 1/16

Thickness (Decimal Inch) 0.0700

Maximum Temperature (F) 250.000

Minimum Temperature (F) -40.000

$6.68

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Value Collection - 67mm ID x 71mm OD, Buna-N O-Ring - 2mm Thick, Round Cross Section, 70 Durometer

Item #: 38807368
Brand: Value Collection
Exact Tooling IR#: 04

Features and Benefits

Round cross-section shapes can be used in both static and dynamic applications. They are used as a mechanical seal or gasket and are seated in a groove and compressed during assembly between two or more parts.

Buna-N, also known as nitrile rubber (NBR), is made of a synthetic rubber that has anti-microbial properties and is resistant to chemicals, oils, solvents, greases and petroleum-based fluids. It is resistant to abrasions, cuts, punctures, slashes and snags.

Product Specifications
Cross Section Shape	Round
Material	Buna-N
System of Measurement	Metric
Durometer	70
Inside Diameter (mm)	67.00
Outside Diameter (mm)	71.00
Thickness (mm)	2.00

Product Specifications

Cross Section Shape Round

Material Buna-N

System of Measurement Metric

Durometer 70

Inside Diameter (mm) 67.00

Outside Diameter (mm) 71.00

Thickness (mm) 2.00

$16.29

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

KIPP - M10 x 1.5, 0.94" Hub Diam, Steel Heavy Duty Adjustable Tension Lever with Internal Thread - 3.46" OAL, 2.3" High, 0.55" Hole Depth

Item #: 79620357
Brand: KIPP
Model #: K0108.1101
Exact Tooling IR#: 04

Product Specifications
Connection Type	Heavy Duty Tension Levers with Internal Thread
Thread Size	M10x1.5
Handle Material	Steel
Height (Inch)	2.30
Hub Diameter (Decimal Inch)	0.9400
Hole Depth (Decimal Inch)	0.55

$29.41

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

KIPP - M10, Zinc Threaded Stud Adjustable Clamping Handle - 91mm OAL, 58.5mm High

Item #: 50055789
Brand: KIPP
Model #: K0123.3106X50
Exact Tooling IR#: 04

Product Specifications
Connection Type	Threaded Stud
Thread Size	M10
Overall Length (mm)	91.00
Handle Material	Zinc
Components Finish/Coating	Natural
Handle Finish/Coating	Chrome Plated
Components Material	Stainless Steel
Handle Type	Adjustable Handle
Handle Radius Length (Decimal Inch)	3.1496
Handle Arm Style	Modern Design / Teardrop End
Body Height (Decimal Inch)	1.4567
Body Diameter (mm)	22.00
Base Height (Decimal Inch)	0.3937
Base Diameter (Decimal Inch)	0.6299
Handle Arm Angle	Angled
Body Height (mm)	37.00
Body Diameter (Decimal Inch)	0.8661
Base Height (mm)	10.00
Base Diameter (mm)	16.00
Thread Length (Decimal Inch)	1.9685
Overall Height (mm)	58.50
Overall Height (Decimal Inch)	2.3032
Thread Length (mm)	50.00
Handle Radius Length (mm)	80.00
Handle Color	Metallic

$34.38

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Caplugs - Serrated Round Head, Threaded Plug - 1.47" OD, 13/16" Long, Polypropylene, Red

Item #: 33479528
Brand: Caplugs
Model #: QTF17-22AK1
Exact Tooling IR#: 04

Product Specifications
Type	Plug
Style	Serrated Round Head;Threaded
Outside Diameter (Decimal Inch)	1.4700
Length (Inch)	13/16
Material	Polypropylene
Color	Red
Compatible TPI	12

$674.98

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

KIPP - 1/2-13, 1.1" Hub Diam, Steel Heavy Duty Adjustable Tension Lever with Internal Thread - 4.17" OAL, 2.7" High, 0.67" Hole Depth

Item #: 79620399
Brand: KIPP
Model #: K0108.2A51
Exact Tooling IR#: 04

Product Specifications
Connection Type	Heavy Duty Tension Levers with Internal Thread
Thread Size	1/2-13
Handle Material	Steel
Height (Inch)	2.70
Hub Diameter (Decimal Inch)	1.1000
Hole Depth (Decimal Inch)	0.67

$37.78

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

KIPP - M5, Fiberglass Reinforced Plastic Threaded Stud Adjustable Clamping Handle - 47mm OAL, 33.5mm High

Item #: 50079854
Brand: KIPP
Model #: K0270.10516X15
Exact Tooling IR#: 04

Product Specifications
Connection Type	Threaded Stud
Thread Size	M5
Overall Length (mm)	47.00
Handle Material	Fiberglass-Reinforced Plastic
Components Finish/Coating	Natural
Components Material	Stainless Steel; Zinc (Toothed Wheel)
Handle Type	Adjustable Handle
Handle Radius Length (Decimal Inch)	1.5748
Handle Arm Style	Modern Design / Teardrop End
Body Height (Decimal Inch)	0.9646
Body Diameter (mm)	14.50
Base Height (Decimal Inch)	0.1575
Base Diameter (Decimal Inch)	0.3937
Handle Arm Angle	20 Angle
Body Height (mm)	24.50
Body Diameter (Decimal Inch)	0.5709
Base Height (mm)	4.00
Base Diameter (mm)	10.00
Thread Length (Decimal Inch)	0.5906
Overall Height (mm)	33.50
Overall Height (Decimal Inch)	1.3189
Thread Length (mm)	15.00
Handle Radius Length (mm)	40.00
Handle Color	Yellow

$22.09

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

KIPP - 3/8-16, Zinc Threaded Stud Adjustable Clamping Handle - 91mm OAL, 58.5mm High

Item #: 50092998
Brand: KIPP
Model #: K0123.93A42X30
Exact Tooling IR#: 04

Product Specifications
Connection Type	Threaded Stud
Thread Size	3/8-16
Overall Length (mm)	91.00
Handle Material	Zinc
Components Finish/Coating	Natural; Natural (Cap)
Handle Finish/Coating	Powder Coated
Components Material	Stainless Steel; Stainless Steel (Cap)
Handle Type	Adjustable Handle
Handle Radius Length (Decimal Inch)	3.1496
Handle Arm Style	Modern Design / Teardrop End
Body Height (Decimal Inch)	1.6339
Body Diameter (mm)	22.00
Base Height (Decimal Inch)	0.3937
Base Diameter (Decimal Inch)	0.6299
Handle Arm Angle	Angled
Body Height (mm)	41.50
Body Diameter (Decimal Inch)	0.8661
Base Height (mm)	10.00
Base Diameter (mm)	16.00
Thread Length (Decimal Inch)	1.1811
Overall Height (mm)	58.50
Overall Height (Decimal Inch)	2.3032
Thread Length (mm)	30.00
Handle Radius Length (mm)	80.00
Handle Color	Orange

$30.07

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Value Collection - 5" ID x 5-1/4" OD EPDM O-Ring - 1/8" Thick, Round Cross Section, Durometer 70

Item #: 90718594
Brand: Value Collection
Exact Tooling IR#: 04

Features and Benefits

Round cross-section shapes can be used in both static and dynamic applications. They are used as a mechanical seal or gasket and are seated in a groove and compressed during assembly between two or more parts.

EPDM (Ethylene Propylene) is ideal for phosphate ester based hydraulic fluids. It provides resistance to weather, abrasion, hot water, steam, silicone fluids, dilute acids and dilute ketones. It is not resistant to petroleum fluids and diester lubricants.

Product Specifications
Cross Section Shape	Round
Material	EPDM
Dash Number	250
System of Measurement	Inch
Durometer	70
Durometer (Shore A)	70A
Inside Diameter (Inch)	5
Inside Diameter (Decimal Inch)	4.9840
Outside Diameter (Inch)	5-1/4
Outside Diameter (Decimal Inch)	5.2620
Thickness (Inch)	1/8
Thickness (Decimal Inch)	0.1390
Maximum Temperature (F)	300.000
Minimum Temperature (F)	-70.000

Product Specifications

Cross Section Shape Round

Material EPDM

Dash Number 250

System of Measurement Inch

Durometer 70

Durometer (Shore A) 70A

Inside Diameter (Inch) 5

Inside Diameter (Decimal Inch) 4.9840

Outside Diameter (Inch) 5-1/4

Outside Diameter (Decimal Inch) 5.2620

Thickness (Inch) 1/8

Thickness (Decimal Inch) 0.1390

Maximum Temperature (F) 300.000

Minimum Temperature (F) -70.000

$130.19

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It